Sea gull lighting 75330-825 Installationsanleitung PDF herunterladen

Carefully remove the fixture from the carton and check that all parts

are included, as shown in Figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

FIGURE 1

*NOT INCLUDED

BEFORE YOU BEGIN

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-989

21009

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

Thread fixtur

e mounting screws (B) thr

ough mounting bar (A). Secure

mounting bar (A) to outlet box with outlet box scr

ews (not supplied).

STEP 1:

STEP 2:

INST

ALLATION

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place

of purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

NOTE: FOR FIXTURES PROVIDED WITH 75˚C OR 90˚C SUPPLY WIRE

WARNING ONLY-(THESE WARNINGS ARE PROVIDED ON THE LABEL

AND ON THE FIXTURE CARTON): RISK OF FIRE. MOST DWELLINGS

BUILT BEFORE 1985 HAVE SUPPLY WIRE RATED 60˚C. CONSULT A

QUALIFIED ELECTRICIAN BEFORE INSTALLING.

A. Use a listed wir

e connector to connect the fixtur

e hot wire (black

wir

e, or r

ound and smooth tracer) to the supply hot wir

B. Use a listed wire connector to connect the fixture common wire

(white wire, or square and rigid) to the supply common wire.

C. Gently try to r

emove the wir

es fr

om the connector

. If you can

emove the wir

es, car

efully re-do the wiring connection.

*OUTLET BOX

FIXTURE

MOUNTING

SCREWS (B)

*WIRE

CONNECTORS

MOUNTING

BAR (A)

*OUTLET BOX

SCREWS

CANOPY (C)

CAP NUTS (J)

CENTER

PIPE (E)

COUPLING (D)

FINIAL (F)

DIFFUSER (G)

GREEN GROUNDING

SCREW (H)

FIXTURE GROUND

WIRE (I)

1 2

Inhaltsverzeichnis

Seite 1

Carefully remove the fixture from the carton and check that all partsare included, as shown in Figure 1. Be careful not to misplace any ofthe screws o

Seite 2

After wires are connected, tuck them carefully inside outlet box.Raise canopy (C) to the ceiling allowing for fixture mounting screws(B) to protrude t

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea gull lighting 75330-825 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Sea gull lighting 75330-825 herunter. Sea Gull Lighting 75330-825 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Sea gull lighting 75330-825