Sea gull lighting 61660-839 Installationsanleitung PDF herunterladen

Carefully remove the fixture from the carton and check that all parts

are included, as shown in Figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

FIGURE 1

*NOT INCLUDED

BEFORE YOU BEGIN

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1433

12008

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

Feed the fixture wire through the fixture loop (F) and thread fixture

loop (F) to top of fixture.

STEP 1:

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place

of purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

Slide screw collar ring (K) and canopy (G) (in that or

der) to top of

socket assembly (U). Be sur

e not to damage the fixtur

e wir

e. Thread

rod assembly (E) to nipple of the coupling (J).

Feed the fixture wire from the socket assembly (U), thr

ough: the r

assembly (E) and thread rod assembly (E) into socket assembly (U).

Assemble r

od assembly (E) by thr

eading desired amount of r

ods

together

Secure mounting bar (A) to outlet box using outlet box scr

ews (not

supplied). Thr

ead nut (C) onto nipple (I) so five threads are exposed.

Thread nipple (I) to mounting bar (A) and secure by threading nut (C)

to mounting bar (A). Thread screw collar (B) to nipple (I).

INSTALLATION – ROD ASSEMBLY

STEP 1:

STEP 2:

STEP 3:

STEP 4:

*OUTLET BOX

*WIRE

CONNECTORS

CANOPY (G)

NIPPLE (I)

SHADE (R)

COUPLING (J)

ROD ASSEMBLY (E)

RET

AINING RING (T)

FOR STEM MOUNT

MOUNTING

BAR (A)

SCREW COLLAR

RING (K)

SCREW COLLAR (B)

NOTE: THIS FIXTURE

CAN BE HUNG USING

1, 2, OR 3 RODS.

SELECT THE NUMBER

OF RODS DESIRED.

GREEN GROUNDING

SCREW (D)

SOCKET

ASSEMBLY (U)

NUT (C)

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

FIXTURE

LOOP

(F)

1 2

FOR STEM MOUNT 1
FOR CHAIN MOUNT 2

Inhaltsverzeichnis

Seite 1 - FOR STEM MOUNT

Carefully remove the fixture from the carton and check that all partsare included, as shown in Figure 1. Be careful not to misplace any ofthe screws o

Seite 2 - FOR CHAIN MOUNT

Open other length of chain and attach to the screw collar (B). Closeall lengths of chain to secure.After wires are connected, tuck them carefully insi

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea gull lighting 61660-839 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Sea gull lighting 61660-839 herunter. Sea Gull Lighting 61660-839 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Sea gull lighting 61660-839