Sea gull lighting 77088-98 Installationsanleitung PDF herunterladen

*OUTLET

BOX

FIXTURE

MOUNTING

SCREWS (C)

*WIRE

CONNECTORS

MOUNTING

BAR (A)

*OUTLET

BOX SCREWS

KEYSLOTS (N)

INSTALLATION AND SAFETY INSTRUCTIONS

FOR YOUR SAFETY

GENERAL

ASSEMBLY

WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE

WORKING ON IS SHUT OFF; EITHER THE FUSE REMOVED OR THE

CIRCUIT BREAKER SET AT OFF.

You don't need special tools to install this fixture. Be sure to follow the

steps in the order given. Under no circumstances should a fixture be hung

on house electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system. Read instructions

carefully. If you are unclear as to how to proceed, consult a qualified

electrician.

BRACKET (I)

CANOPY (E)

GLASS (H)

RING (G)

TABS (L)

BALL NUTS (J)

FIGURE 1

*NOT INCLUDED

Carefully remove the fixture from the carton and check that all

parts are included, as shown in figure 1 and 2. Be careful not

to misplace any of the screws or parts which are needed to

install this fixture.

STEP 1:

Before mounting canopy (E ) to mounting bar (A), place canopy

(E) on flat surface. Next place ring (G) over canopy (E) making

sure the three brackets (I) protrude through holes in canopy (E).

If they do not, adjust the brackets (I) so that they align with the

canopy (E) holes.

NOTE: IF LIGHT LEAKAGE IS PRESENT, SLIGHTLY BEND

THE BRACKETS (I) TOWARDS THE CEILING.

NOTE: FOR FIXTURES PROVIDED WITH 75˚ C OR 90˚ C

SUPPLY WIRE WARNING ONLY- (THESE WARNINGS ARE

PROVIDED ON THE U.L. LABEL AND ON THE FIXTURE

CARTON): RISK OF FIRE. MOST DWELLINGS BUILT

BEFORE 1985 HAVE SUPPLY WIRE RATED 60˚ C. CONSULT

A QUALIFIED ELECTRICIAN BEFORE INSTALLING.

IF SUPPLY WIRES ARE LOCATED WITHIN 3” OF BALLAST,

USE WIRE RATED FOR AT LEAST 90˚C.

Installation And

Safety Instruction

HC-471

052699

Fill In Item Number On Carton And

File This Sheet For Fixture Reference. ITEM#_____________

GREEN

GROUNDING SCREW (D)

*OUTLET BOX

SCREWS

MOUNTING

BAR (A)

*WIRE

CONNECTORS

MOUNTING

SCREWS (C)

*GROUND WIRE

*OUTLET BOX

GROUNDING AND MOUNTING BAR LOCK UP

FIGURE 2

*NOT INCLUDED

1 2

Installation And 1
Safety Instruction 1

Inhaltsverzeichnis

Seite 1 - Safety Instruction

*OUTLET BOXFIXTURE MOUNTING SCREWS (C)*WIRE CONNECTORSMOUNTING BAR (A)*OUTLET BOX SCREWSKEYSLOTS (N)INSTALLATION AND SAFETY INSTRUCTIONSFOR YOUR SAFET

Seite 2

INSTALLATION HC-471FINAL ASSEMBLYSTEP 6:IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLETBOX.STEP 2:STEP 1:Make sure no bare wires can be seen outsi

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea gull lighting 77088-98 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Sea gull lighting 77088-98 herunter. Sea Gull Lighting 77088-98 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Sea gull lighting 77088-98