Sea gull lighting 31661-839 Installationsanleitung PDF herunterladen

Carefully remove the fixture from the carton and check that all parts

are included, as shown in Figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

FIGURE 1

*NOT INCLUDED

BEFORE YOU BEGIN

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1424

10408

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don’t need special tools to install this fixture.

•

Be sure to follow the steps in the order given.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

• Read instructions carefully.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

*OUTLET BOX

SCREWS

SCREW

COLLAR (E)

CANOPY (H)

MOUNTING

BAR (A)

CHAIN (S)

NUT (B)

SCREW COLLAR

RING (G)

FIXTURE LOOP (J)

GREEN

GROUNDING

SCREW (D)

NIPPLE (C)

ARMS (M)

Rotate arms (M).

STEP 1:

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

Secur

e mounting bar (A) to outlet box with outlet box scr

ews (not

supplied). Thr

ead nut (B) on nipple (C) so that 3 threads are exposed

above nut (B). Thread nipple (C) into mounting bar (A) and secure

with nut (B). Thread screw collar (E) to nipple (C).

STEP 2:

Using 2 pairs of pliers, open one link of chain (S) and connect it to

the fixture loop (J) at the top of the fixture.

STEP 3:

Slide the screw collar ring (G) and canopy (H), in that or

der

, over

chain (S). Open one link on the other end of the chain (S) and attach

it to the screw collar (E) which has been mounted to the nipple (C).

BE SURE TO CLOSE ALL CHAIN LINKS COMPLETEL

STEP 4:

INSTALLATION

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place

of purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

STEP 1

STEP 2

STEP 4

STEP 3

1 2

Inhaltsverzeichnis

Seite 1

Carefully remove the fixture from the carton and check that all partsare included, as shown in Figure 1. Be careful not to misplace any ofthe screws o

Seite 2

STEP 5STEP 7After wires are connected, tuck them carefully inside outlet box.Raise canopy (H) against ceiling and thread the screw collar ring (G)to t

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea gull lighting 31661-839 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Sea gull lighting 31661-839 herunter. Sea Gull Lighting 31661-839 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Sea gull lighting 31661-839